Click image to view full size image
wear resistant ceramic tile-rubber machinery parts/liner:
It is one kind of ceramic parts used on the rubber processing machinery,which has good corrosion resistance, high operating temperature, good mechanical characteristics, high wear resistance, high hardness, high thermal shock resistance.
They enjoy popularity among our customers in Australia and the customers make enquires ceaseless.
We can make any ceramics accroding to your requirements!
| Porperty | Uint | Slim |
| Material | Al2O3 96% | |
| Colour | white,pink,dark red | |
| Density | g/cm3 | 3.8 |
| Flexural Strength | Mpa | 300 |
| Compressive Strength | Mpa | 3400 |
| Modulus of Elasticity | GPa | 350 |
| Impact Resistance | MPa m1/2 | 4 |
| Weibull Modulus | m | 10 |
| Vickers Hardness | HV 0.5 | 1800 |
| Thermal Expansion Coefficient | 10-6K-1 | 5.0-8.3 |
| Thermal Conductivity | W/mK | 24 |
| ThermalShock Resistance | T | 250 |
| Maximun Use Temperature | 1600 | |
| Volume Resistivity at 20 | Ω cm | >1014 |
| Dielectric Strength | kV/mm | 20 |
| Open Porosity | % | 0 |
| Dielectric Constant | εr | 10 |
| Dielectric Loss Angle | tanδ | 0.001 |
Wear Resistant Ceramic Tile
